PDA

View Full Version : Renaissance Wax: Before & After Results



The Rebel
01-15-2014, 08:13 PM
Just got done with my 1st time using this stuff.

Before

3660436605366063660736608

The Rebel
01-15-2014, 08:16 PM
After

36609366103661136612

The Rebel
01-15-2014, 08:16 PM
Photo Stand & Application Brush I Made

36616366173661836619

del
01-15-2014, 08:33 PM
I usually put on a good coat with a Q-tip and once it drys you can usually see a light colored haze about it . I then take a soft bristled brush and buff it good until i can see a nice contrast of the highs and lows on the coin. the highs have a nice sheen to them . nice pictures Roger.

The Rebel
01-15-2014, 08:42 PM
Thanks for the tips Del.

I'll give it another coat (more thicker this time) and let it dry & then buff. I guess the process is like waxing a car.

CTTodd
02-18-2014, 03:07 PM
I started with this method last year the results are very good. Like your photo stand too.

Mayadigger
03-12-2014, 05:31 PM
Ave Rebel et al,

The application of renwax is Your Friend when it comes to bringing out details on worn coins/artifacts, especially those with green patina. The wax not only protects your objects from the atmosphere, but also helps darken the patina to an eye-pleasing color.

I apply the wax with my thumb and fore-finger, just to fully work the wax into all the surfaces. This ain't rocket science, no Q-tips, please. Just like waxing a car, the more coats the better. The trick, as mentioned above is to let each thin coat of wax to fully dry, then buff. I use a special Dremel buffing tool. You can simply place your coin onto a soft cotton towel, gently press down and buff it about in a swirling manner. The more coats the more you'll begin to see the 3D effect of the multiple coats.

Hope this helps,

Kevin

Justice70
04-14-2014, 02:43 AM
Going to have to give this method a try. I have an old large cent that I worked on for awhile but still can't get a date.