PDA

View Full Version : Program Change



Joe Dirt
06-03-2017, 07:25 PM
I have a program that seems to be working pretty well (after all my vast 11 hours experience with the Deus...HA). I am thinking of changing the tones from full to four tone giving an actual three tones using the fourth tone as follows:
1. iron tone from 0 to 31
2. mid tone from 32 to 71
3. high tone from 72 to 98
4. iron tone for 99 to "close the iron loop"

Anyone see a problem with that?

Lodge Scent
06-05-2017, 07:52 PM
Joe, I was a Full Tones/O Discrim guy for my first year. Now I use Multitones with a bit of Discrim and don't see changing back. Your tonal arrangement will work fine. I typically run with the following 3 tones:


0 to 6 = Discrim
6 to 30 = 120
30 to 97 = 603
97 to 99 = 120

You are still going to get a lot of wrap around at 98. You can safely drop it to 97 and have very little concern of missing a big shallow silver.....especially if you turn Normalization off.

Joe Dirt
06-06-2017, 01:53 AM
Interesting. Thank you.

Rogue Relic Hunter
12-05-2017, 01:04 PM
i also use FULL tones and am training my ear to hear rather than look at the remote. takes time.

Rogue Relic Hunter
12-05-2017, 01:05 PM
by the way, relatively new to the deus. before that the AT Pro and before the Fischer CZ-5. that is a vintage machine now.