PDA

View Full Version : mxt settings



BOWSER
03-11-2011, 01:10 PM
after trying several settings on the mxt ,i find that i like the setting 3 on disc and 7 on gain for most situations in the ground here in ma. I am not sure i really need to get into the plus situations unless i'm in a relatively trash free areas.am i wrong in thinkin this way. :dontknow:

Toadman
03-11-2011, 06:33 PM
I run 2 and 10.. this is how i run it 99 % of the time..I go hotter when there a very few targets .. Those settings you mention may work in tot-lots though..

Dirt Fisher
03-11-2011, 07:40 PM
i run 2 and a +1. That seems to do the trick for me. :peace:

v3ikid
03-11-2011, 08:45 PM
I run 2 and +3. Yeah it's a little noisy but it allows the 5.3 to get pretty deep for it's size.

fastfwd
03-25-2011, 05:54 AM
I run 2 and 10.. this is how i run it 99 % of the time..I go hotter when there a very few targets .. Those settings you mention may work in tot-lots though..


same here 2 and 10 unless im getting interference from power lines or something then i drop down to 2 and 8

Vito
03-29-2011, 03:55 PM
Gain on preset and disc on 3 here. If there is a iffy target the gain is turned all the way up to get a better target ID. Threshold is where i can barely listen to the hum (some time a little less, depends on how my tinnitus stresses me). And I always search in two-tone ID mode (relic and trigger in center position). This way I won't miss targets on the disc's edge (gold/jewelry).

Vito

Happy Hunting