PDA

View Full Version : Detector foot/stand



Ill Digger
02-05-2010, 09:39 AM
I've been wanting a stand for the DFX ,but didn't want to spend much money.
So I made my own. I was serching the web and different forums for some ideas.
I almost took an idea from Lowjiber (sooo close !)
I really liked the one Whites offers but it wasn't quite tall enough, and it is narrower at the bottom than at the top.
I wanted mine to be wider at the base and taller.
The control box is 5 wide ,so I made my base 6 wide.
The rear of the box would sit in the wet grass and mud before, now it sits 4 off the ground(with the rubber feet its 4 1/2).
That should do it !

RickO
02-05-2010, 11:59 AM
That is a great stand.... Nice innovation. RickO

del
02-05-2010, 02:18 PM
you do good work Tim , looks very professionally done .

Ill Digger
02-05-2010, 03:37 PM
you do good work Tim , looks very professionally done .

Thank you very much!
I tried :yes:

coinnut
02-05-2010, 04:34 PM
Hey, did ya bend that with your bare hands Superman? lol Nice job. :yes: That seems to be the best and simplest design. Works great and doesn't get in the way of anything. Makes you wonder why all these other stands are made wrong :huh:

sectshun8
02-06-2010, 08:13 AM
Tim that worked out great thumbsup01 A nice no nonsense design... I like the height too, most stands only give you an inch or two.

Lowjiber
02-06-2010, 09:15 AM
Looks good Tim!!!

Ill Digger
02-06-2010, 06:31 PM
Tim that worked out great thumbsup01 A nice no nonsense design... I like the height too, most stands only give you an inch or two.

Thanks Jimmy!
That's where I was coming from, even at a mowed yard or park, the shorter stands wouldn't be tall enough to get the box ,up and out of the wet grass.
Thanks again :grin:

SpringTxDigger
02-07-2010, 09:04 PM
Ok Tim I can order mine when:huh:thinkingabout: :)

coinnut
02-08-2010, 05:41 PM
I want one of those for my DFX and my E Trac lol so get cookin' there Tim. ;)

Ill Digger
02-09-2010, 01:43 PM
Ok Tim I can order mine when:huh:thinkingabout: :)


I want one of those for my DFX and my E Trac lol so get cookin' there Tim. ;)

I've got to figure out a way to cut down on production time.
It took me about 6-7 hrs. to make one.
It was my first crack at it so there was some stop and think about this time involved :confused:
I think I am going to make a few more . PM me I can whip up a few more.

odave
04-03-2011, 10:53 PM
Nice Job !! Very well done thumbsup01

russellt
04-09-2011, 06:25 PM
hey that looks good

Ill Digger
04-09-2011, 10:56 PM
Nice Job !! Very well done thumbsup01


hey that looks good

Thanks guys! :grin: