1/2 gram gold nugget detector test.
I have a .5 ( 1/2) gram gold nugget and decided to test my 3 detectors. All 3 were set with DISC settings at the minimum and were tested in the same exact room and spot in the house.
The Whites M6 ( 14khz)with the stock coil set just a little past the SENS presets without chattering,and no ground balancing, saw it at 1/2 inch---Loud and clear.
The Garrett AT Pro in Pro Mode -Zero more sensitive to EMI inside the house, and setting the SENS to 2 bars instead of 6 bars,so it wouldn't chatter, and on auto ground balance, saw it at 1/2 inch-----Loud and clear.
My IDX ( 6.59khz) with 9.5 inch coil, saw it at 1/2 inch , only after setting the SENS at almost the maximum setting without chattering----Loud and clear.
The M6 and AT Pro are close to the same frequency ( in the 14-16 khz range) but in my honest opinion, outside with a good ground balance and maximum adjustment setting the AT Pro would be able to detect even a slightly smaller nugget at a slight more depth than the M6 could.
Re: 1/2 gram gold nugget detector test.
O ya thumbsup01 Got to try one! Our family likes to camp at St. parks and that would be a good simple detector to take to the beach in the water and at that price on good ring and its paid for!! :yes: Thanks for all the info.
Re: 1/2 gram gold nugget detector test.
were there any nails in the woodwork under the floor?
Re: 1/2 gram gold nugget detector test.
Hey dime! Mail that to me and i'll test out my detectors on it. rofl
Re: 1/2 gram gold nugget detector test.
Quote:
Originally Posted by
russellt
were there any nails in the woodwork under the floor?
Strung the detector in the air from the ceiling fan with some nylon thin rope. no metal within 3 feet of the detector.
Re: 1/2 gram gold nugget detector test.
Quote:
Originally Posted by
RaZR
Hey dime! Mail that to me and i'll test out my detectors on it. rofl
Send your detectors to me and I'll test them free for you....no charge !!!!!!! thumbsup01 thumbsup01
1 Attachment(s)
Re: 1/2 gram gold nugget detector test.
Robbie my MXT with the D2 coil on it seen this 1 gram bullion in a 14K bezel at about 4 inches. It VDI'd at 22 and gave a really loud signal
Re: 1/2 gram gold nugget detector test.
Is the AT pro a threshold detector or silent search?
Re: 1/2 gram gold nugget detector test.
Quote:
Originally Posted by
Dimeman
Send your detectors to me and I'll test them free for you....no charge !!!!!!! thumbsup01 thumbsup01
Can't do that! I just sent the Vision in for the upgrade. And my other babies are too young to leave home. :grin:
Re: 1/2 gram gold nugget detector test.
Quote:
Originally Posted by
wingmaster
Is the AT pro a threshold detector or silent search?
Silent search
Re: 1/2 gram gold nugget detector test.
I wasn't sure if it was a treshold detector or not, I wonder how the MXT would do in that test?
Re: 1/2 gram gold nugget detector test.
That sounds pretty far fetched to me Robbie :dontknow: :thinkingabout: ,,, Better send me that nugget for retesting lol lol lol :angelic:
Re: 1/2 gram gold nugget detector test.
Quote:
Originally Posted by
giant056
Robbie my MXT with the D2 coil on it seen this 1 gram bullion in a 14K bezel at about 4 inches. It VDI'd at 22 and gave a really loud signal
That has more flat surface area than a 1/2 gram nugget, and would read as a larger target.
I wanted to see if any of my detectors would pick up a signal from a small piece of gold...and they did.
Re: 1/2 gram gold nugget detector test.
Quote:
Originally Posted by
Nitro 54
That sounds pretty far fetched to me Robbie :dontknow: :thinkingabout: ,,, Better send me that nugget for retesting lol lol lol :angelic:
I thought you had all the gold nuggets, except for this one :huh::huh::huh: lol lol