Re: Going deep With The Vision/V3/V3i
Yes,with a coil other than the D2 this isnt noticed when in loctrac.With the 6x10 the offset definately has an effect.I tried the 6x10 for coinshooting and prospecting and could get a complete reversal with the offset adjustment (that is,going from an increase in threshold towards the ground, to an increase when lifting the coil away from the ground).I have noticed the difference in autotrac with the D2,as youve stated Jack.Its only the D2 in loctrac that the manual offset seems to have no effect on evening out the threshold.
Re: Going deep With The Vision/V3/V3i
The D2 is sensitive but is my favorite coil. The offset won't help. If you set to +1 and ground balance it will balance sightly positive. I won't help to make the coil balance. Rob
Re: Going deep With The Vision/V3/V3i
Hi, Jack. I'm confused. If you aren't using discrimination how can you set your VDI tones so that you don't hear the VDI's you don't want to hear? VDI's aren't considered in All Metal mode. Thanks for the help.
Re: Going deep With The Vision/V3/V3i
Quote:
Originally Posted by
DirtFisher
Hi, Jack. I'm confused. If you aren't using discrimination how can you set your VDI tones so that you don't hear the VDI's you don't want to hear? VDI's aren't considered in All Metal mode. Thanks for the help.
I am in discrimination mode. I am just not setting any VDI's to be rejected. By setting the Tone to 0 you don't hear it.
Re: Going deep With The Vision/V3/V3i
This was a great post. Thanks :)
Re: Going deep With The Vision/V3/V3i
Thanks, Jack. I understand now.