Printable View
Hey Diggers,
I got my electrolysis tank up and running (if you can call a plastic bucket a tank!). These are my first two attempts and I have lots more to go. The key is circa 1500 to 1600 and the hammer is straight up 1,000 years old (give or take). Thanks for looking and happy hunting!
Great results, Dave! Have we seen "before" photos of these two items? How fitting that you posted Thor's hammer on Thorsday! ;)
Are you going to coat them with something to keep them from rusting?
I didn't take very good "before" pics but will do better on the next relics. I coated the key with wax. I'm giving the hammer one more round of electrolysis and will then coat it with wax to keep it from rusting again.Quote:
Originally Posted by Tony Two-Cent
I've got a very similar hammer Dave , wish it was just as old though ! nice job on the electrolysis
1,000 year old hammer....mind boggling. What are you using to preserve them Dave? I've used a soak in WD40. That actually works well for a year or so then I start to see rust creeping back. I think I will have to do the wax treatment for more permanent results. The best tip I ever got was to do an acetone soak to prevent the flash rust.
What do you use for a power source?
electricity!!Quote:
Originally Posted by noah
Tim, I drew you a diagram of how electrolysis works:
Attachment 65957
That's amazing Tony! Knowing how you save every scrap of paper you ever had I'm confident this drawing will be in your archives forever!Quote:
Originally Posted by Tony Two-Cent
Ha ha haaaaa. I've heard of guys using a battery charger but was trying to figure out what is best. I've used a motorcycle battery charger but have had limited success. I suppose you all just run direct current from a wire you stick into the outlet . :devilish:
Noah,Quote:
Originally Posted by Noah
I bought a battery charger but not the fancy digital kind. Those don't work for electrolysis because it senses there's no battery being charged. I bought the kind that I always called "trickle chargers."
Cool thanks Dave
Great job Dave. For what it's worth my tank is an orange Lowe's plastic bucket with cut iron rebar for the nodes around the perimeter. If you watch all the YouTube vids on electrolysis you'd think it just takes a few minutes for relics to come out sparkling clean, but the reality is it can take quite some time. Some of my heavier encrusted ax heads took several long cycles before they looked decent.
John
Great read about electrolysis. Maybe someday I'll get a set up but ..... I'm the guy who gets shocked putting batteries in a flashlight.