Printable View
I have a program that seems to be working pretty well (after all my vast 11 hours experience with the Deus...HA). I am thinking of changing the tones from full to four tone giving an actual three tones using the fourth tone as follows:
1. iron tone from 0 to 31
2. mid tone from 32 to 71
3. high tone from 72 to 98
4. iron tone for 99 to "close the iron loop"
Anyone see a problem with that?
Joe, I was a Full Tones/O Discrim guy for my first year. Now I use Multitones with a bit of Discrim and don't see changing back. Your tonal arrangement will work fine. I typically run with the following 3 tones:
0 to 6 = Discrim
6 to 30 = 120
30 to 97 = 603
97 to 99 = 120
You are still going to get a lot of wrap around at 98. You can safely drop it to 97 and have very little concern of missing a big shallow silver.....especially if you turn Normalization off.
Interesting. Thank you.
i also use FULL tones and am training my ear to hear rather than look at the remote. takes time.
by the way, relatively new to the deus. before that the AT Pro and before the Fischer CZ-5. that is a vintage machine now.