Printable View
Today I had about 90 minutes to hunt a cove of the Columbia River, expecting to find a few coins. I did find some coins but also found a monogrammed ring marked sterling buried in the muck. It's more or less dark and discolored, except one tiny spot that appeared to be wrapped in tape (?)
Anyway, I'd like to clean it up and would like advice.
A little baking soda and water will remove the surface tarnish and shine it right up!
That's too easy! I expected some secret formula only available with a secret password or something. Thanks!
Well, the pic doesn't really show it due to poor lighting, but the ring cleaned up pretty well. Enough to find the crack the tape was hiding. This was the first non-costume ring I've found at this cove so I think hanging out with mownomo last week rubbed off some ring mojo. :grin:
That's a nice looking ring. Does it fit? If so, you could change your name to Doug or Daniel or David or ......:lolsign:
Darn nice hunk of silver you found there :thumbsup02:
How does electrolysis work on silver? Have you tried that?
My wife and I have our gold wedding rings cleaned once a year. They use electrolysis and the rings come out nice and shiny.
I've found that toothpaste works really well to clean and polish silver!
Ave!
Cleaning silver artifacts is much difficult than simple toothpaste. See below for before and after photo of a 3rd Cent Roman ring.
Best regards,
KevinAttachment 45940Attachment 45941
it looks great Kevin was there any reconstruction of the stone or edge of the ring ??
Dan
Those look great. How did you do it?Quote:
Originally Posted by Mayadigger
Ave!
DOH!
Make a simple paste of A&H Baking Soda, apply it to a soft cotton towel, then rub/scrub both sides in an easy circular manner without pressing down too hard, is not at all. Circular motions and then rinse under running water.
Best to all,
Kevin