Search:

Mel is still posting and using his V3i. Magic's absence has nothing to do with his detector. You are using general statements that have no fact. Could you please list the guys who have quit because...

I leave mine set at 10.

Bowser you are still having IDX withdrawal. :groovy: :groovy:

SJV, you didn't mean X1, right? I think the XLT takes a XL1.

Hello Jack, like you the 10D2 is my favorite coil. I finally got a 10x12 to test. I can get the 10x12 to RX15 without overloading, but I couldn't run it there. Now if I run the 10x12 at 2.5 or 7.5 it...

Here's my take, but what do I know? I do know I am not limited to shallow targets soooo.

I cannot stress the importance of a GOOD manual ground balance to start. If your G/B is not right it...

How about a link to the video? Seems he pulled it off You Tube and all the forums. Hmm. He has a warped sense of humor. To quote him, he usually posts after a few beers. I really would like to review...

No it is not fluff. AutoTrac is great but in certain ground conditions or very heavy trash a locked balance is better. Now this is not unique to The V3i or other brand detectors. It is part of...

All metal mode (in search audio) is an all metal mode with an SAT filter applied. Pinpoint is the same thing, except there is no SAT. Tone ID will have no effect in either of these. So, if you pull...

The same reasons that Etrac users are selling their detectors. Check the classifieds. Rob

Yazoo (Mike) explained it in a post. He is OK. If he wanted us to know more he would post. ROB

I had 4 years with my MXT and I think I was very good with it. Like Lowjiber I ran it hot. I wouldn't have spent the extra money to upgrade to the PRO. The M6 like tones just wasn't that big an...

Good report Jack. Both coils were affected by the EMI, but as we know the D2 is just deeper. Neither coil was probably getting its usual maximum depth, but the D2 still had enough depth. I pretty...

Thanks for the info Jack the second post was what I was looking for. Rob

Looking for help here Jack.
I know what span is and what it's used for. The question is how are you getting the right setup? Now I know about trial and error BUT: still there has to be a procedure....

OK Snake we're all ears, and you can't say too much. And by the way my ground sucks. lol Rob

Hi Bob, I thought there was lose of depth with correlate compared to best data. How about some info on this.
I know Magic and I are looking for Max depth. Rob

The D2 is sensitive but is my favorite coil. The offset won't help. If you set to +1 and ground balance it will balance sightly positive. I won't help to make the coil balance. Rob

Hey Magic,

My program is actually the same as yours except I have different tones adjusted for my hearing. We are even using the same base threshold and fade rate.

I used the program yesterday...

Good post Jack, and Amen on the Gurus. :tongue: Coming from an MXT a little noise doesn't bother me. Just because you hear it on our forums doesn't mean it is so.

I've pretty much come to the...

I talked to somebody at Whites once, but I can't remember who. The back light draw is minimal. Rob

Jack, we have all had your experience over there. I read but gave up posting. I don't used modulation but will give it a try. That would be 2 for the V3i, correct. Did you ever notice there are only...

I'm still looking for a Whites 8x10 SEF. :beatdeadhorse:Rob

I'm not Jack but let me answer your question. I consider metal detecting a hobby, but I have covered the cost of all my detectors with my finds.

I'll probably do about $450 in clad every year....

The 5.3 works fine on the V3i, but it's closer to 6.5 inches across. The 5.3 is deeper but the 4x6 has better separation. Rob