Results 1 to 4 of 4

Thread: need some help

  1. #1

    need some help

    I've been doing good detecting with my etrac but now there seems to be a small problem , seems that I get a lot of 1-38 numbers this started a couple of months ago. I don't remember this many 1-38 numbers I mean all the time. if anyone has any ideas please respond.

  2. #2
    Elite Member Digger Don's Avatar
    Join Date
    Nov 2013
    Location
    Northern Illinois
    Posts
    3,465
    How often do you clean under your coil cover?
    Oldest Coin: 1699 William III Halfpenny
    SILVER COINS

    2014-
    147
    2015- 159 2016- 116 2017- 136 2018- 139
    2019- 45

    Indians 45,Lrg.Cnt 1,V 1,war nik 1,Buff 5,Rosie 13,Merc 17,Barber Dime 2,Wash Qtr 7,SLQ 1,Barber Qtr 4,Walker 1,Slvr ring 3,Gold ring 1, 1831 William IV 1,

    YT Channel: https://www.youtube.com/channel/UCoU...FVGumMQ/videos

  3. #3
    How old is your coil? The coil on my E-Trac went bad after 6 years of frequent use. I was getting constant erratic signals and noises. A new coil fixed the problem. If you have an alternate coil try swapping it out and see if it still happens.
    Lifetime totals:
    8 Large Cents, 372 Indian Heads, 2 Two Cent Pieces, 1 Capped Bust Half Dime, 1 Seated Half Dime, 9 Shield Nickels, 67 V Nickels, 119 Buffalo Nickels, 16 Seated Dimes, 125 Barber Dimes, 380 Mercury Dimes, 229 Rosies, 4 Seated Quarters, 15 Barber Quarters, 17 Standing Liberty Quarters, 83 Silver Washingtons, 1 Seated Half, 3 Barber Halves, 16 Walking Liberty Halves

    YouTube Channel: Tony Two-Cent https://www.youtube.com/channel/UCmz...RlHTBIU42bUORg

  4. #4
    I've yet to clean under my cover i'll try that if that don't work Tony Two-Cents thinks it might be the coil. The unit is about 1 1/2 yrs old

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •