Anyone have issues with the depth readings on the Ace 350? Mine will say 2-4 inches when the item is on the surface. If the item is 4 inches down it will jump from 0-8 inches, never stabilizes.
Anyone have issues with the depth readings on the Ace 350? Mine will say 2-4 inches when the item is on the surface. If the item is 4 inches down it will jump from 0-8 inches, never stabilizes.
On Instagram- oxshoedrew
Remember that the depth reading (on all detectors) is calibrated to a piece of metal that is coin-sized. Therefore if the actual target is larger than a coin, the depth reading will be less than the actual depth, and if it's smaller than a coin, the depth reading will be greater than the actual depth.Originally Posted by charlives link=topic=6743.msg78934#msg78934 date=1313326814
In my experience, 4 to 5 inches is the maximum stable/valid reading that the ACE is able to provide.
Minelab E-Trac/Sun Ray X-1 -- Minelab Sovereign GT/Sun Ray S-1 -- White's v3i/Sun Ray DX-1
Fisher CZ3D -- Tesoro Tiger Shark -- Garrett ACE 250
Thank you Epi-hunter!
On Instagram- oxshoedrew