Hey All.

Just wondering if any of you have had the same issues I've had. Seems every few years where the grey wire goes into the coil I notice thru the flexible black plastic protector the grey wire cover separates & you can see the white fiber wrapping or the white wires showing.

Yesterday I was out in the field and noticed that my coil kept sending false signals and I saw that this issue had happened again & that I could see that the white wires were exposed and the insulation had separated exposing the silver wires.

I checked my 6x10 Elliptical DD and noticed the same issue but luckily the white wire insulation had not broken open. I wrapped some electrical tape around it & was able to slide the flexible black plastic protector back over it.

This is the 3rd time I've had to buy new coils (2-10" DD & 1-6x10 Elliptical DD).