Jack's Correlate Program For Cellar Holes (V3i)

[The Rebel]

Hi All.

Was reading Jack's post and wanted to see if anyone was using it at cellar holes. I'm going to add this to my programs & give it a swing.

Makes sense to me but wanted to get any feedback if you have used it while woods / cellar hole hunting.

I run a modified Fox's Max Performance on my stock 10 DD.

http://www.americandetectorist.com/f...?topic=14388.0

Thanks In Advance,
Roger

[CyberSage]

Hello Roger!
This program was originally designed for old parks, but please make it your own, and modify it as needed for your hunting environment. You should be able to sneak the RX Gain up a bit away from EMI sources. Make sure the Lock Track is set to ON, and check your ground balance often. To get the separation at depth you will need to swing slow, and rhythmically. VDI will come in high depending on ground mineralization. For reference It's not unusual to see Silver Dimes in the low 90's. Old thin Dimes will jump from as low as the mid 70's up. Good luck, and let us know how you do.

Jack

[The Rebel]

Will do Jack! thumbsup01