Results 1 to 14 of 14

Thread: Testing new E-trac Battery HOlder for 3 18650 3.7V Batteries!! 17hrs going strong!!

Threaded View

  1. #1

    Testing new E-trac Battery HOlder for 3 18650 3.7V Batteries!! 17hrs going strong!!

    Name:  batterypack.jpg
Views: 398
Size:  3.6 KB

    Got this from a E-bay Seller from Ukraine. Already put in my new NCR Panasonic 18650B Batteries. The starting VOltage is 12.43V (based on my multimeter which is a little low on readings). The Etrac came on with full bars. Will be running down the batteries to see how long they will last before they go flat. The 18650b Batteries are 3400mah. Should last a long time. Will base my voltage readings on my multimeter to keep it ending at the same start and end voltage. Actual start voltage is closer to 12.54.

    First 17 hours of testing Voltage only dropped from 12.43 to 10.83V (3.61V per Cell) Lots of juice left to go. The Minelab 1600 starts at 11.40v 1and drops fast to around 10.50 first hour.
    Last edited by nalc472; 08-24-2016 at 01:13 PM.
    2017 Total:
    Mercs= 2
    Wash=1
    Seated=1
    total slivers=4
    Wheats 8.
    Indians=4 (1864,1865,1888)
    LG cents=1
    1 Sliver Pendent, 2= 3-ringers, 2 tokens

    Most Valuable find ever: 1834 C.B. dime, Oldest 1776 1/2 Reale, Biggest 1822 CB half.
    Detectors: E-trac and F75LTD2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •