So I got out today and I was knocking the ball out of the park. Yep I was back to finding a lot of deep iron. Good solid tones, Pinpoint bars were dominant 2.5 in several directions. So after looking at some posts and thinking about my settings I'm thinking I had to much RX. When I started the hunt I checked my EMI in Transmit Frequency and had a quiet offset with 0. Then I checked Ground Balance for noise and settled at RX 12, noise was in the low 30's, also tried RX 11 with the same noise in the 30's. My Sensitivity was at 93. So my question is, is Less More? By lowering the RX would this quiet the iron down and help gain some depth? Thanks Herm