need some help ! how do you reset / restore factory V3i setting back to like when NEW all of them??
need some help ! how do you reset / restore factory V3i setting back to like when NEW all of them??
I have notes on how to do this. Give me little time to find it. Whites no longer condones this procedure as it messed up quite a few detectors (alters some of the calibrations). Better to just get help from Whites. They are very good about helping out customers.
Jack
"Knowledge counts but common sense matters." ~ LouAnne Johnson
Minelab E-Trac - Whites Vision/V3 - JeTco GTX Huntmaster - Whites Bullseye TRX - Garrett Pro-Pointer
Be warned: You can mess up the calibration of your detector very easily by doing this. This will take you to a hidden menu on both the V3, and the V3i, but my understanding is this should only be done on the V3i. Who knows for sure, Whites is very secretive these days.
To do a master reset... (Factory Reset)
1. Press ON/OFF, and hold. Do not release.
2. Press MENU/TAB, and hold.
3. RELEASE ON/OFF
4. Push ON/OFF again.
From here you will see the master reset option.
"Knowledge counts but common sense matters." ~ LouAnne Johnson
Minelab E-Trac - Whites Vision/V3 - JeTco GTX Huntmaster - Whites Bullseye TRX - Garrett Pro-Pointer
Like Jack stated, this procreedure sent a lot of V3i's back to SweetHome after trying it (that's why White's pulled it from their site). I would advise calling White's technical service and see if they can help you get you V3i straight w/o doing this proceedure. Good luck.
V3i DX-1, D2, 6x10, 4x6, Super-12, 10x14DD
Are you talking about resetting certain programs back to the factory settings? If so then at the bottom of the program section you will see restore. go from there
V3i- Prism IV- Pro Pointer
2020 GOAL: Any Flowing Hair coin
TOTAL 100 YEAR OLD COINS - -280
2020:
Silver: 11
Oldest U.S. Copper - 1795 Liberty Cap
Oldest U.S. Silver - 1829 Capped Bust Dime extra large 10C
Click here to view my album