I know to be careful when slidding the battery pack in, and I am.
However, recently DURING few hunts, hunting for an hour or more or less, out of nowhere all of a sudden my machine read voltage overload and turns off, turn it back on and it reads and does the same thing. If I take the battery out and put it back in, sometimes it works fine, other times, I have to switch out battery packs to get it to go again.......anyone else experience this or have ideas/suggestions?
2014 Goals: 20 Silver, 5 Large Coppers, 1 Gold Coin (not anticipating being able to detect much this year; NEW BABY HERE!!)
So Far: (0) Silver; (2) KG, LC 1807; (2) IH; (3) Buff
2013 Total: 36 Silver; 5LC (including 1 FUGIO)
2012 Total:101 Silver; 11 LC
Try using your aa battery pack and see if it does it. You could have a bad cell in the rechargeable
Whites mxt sunray probe stock coil 6×10 4×6 Minelab Etrac Garrett pro pointer and other stuff
I have 2 different rechargeables, and it happens with both.Originally Posted by Dixie Rebel link=topic=7881.msg90145#msg90145 date=1321663557
Try using your aa battery pack and see if it does it. You could have a bad cell in the rechargeable
The first time it happened, I had just charged one, I reached my destination,I slowly slid it in an it overloaded immediatly. I freaked out. I remembered I had a back up in the car so I found that. I slid it in. Turned on and away I went. A few check points later, in the middle of hunting, it overloaded and turned off. So I do not think it's the battery pack.
I had no problems this weekend with it.
2014 Goals: 20 Silver, 5 Large Coppers, 1 Gold Coin (not anticipating being able to detect much this year; NEW BABY HERE!!)
So Far: (0) Silver; (2) KG, LC 1807; (2) IH; (3) Buff
2013 Total: 36 Silver; 5LC (including 1 FUGIO)
2012 Total:101 Silver; 11 LC
Next time it happens rob use your alkaline batteries.
Whites mxt sunray probe stock coil 6×10 4×6 Minelab Etrac Garrett pro pointer and other stuff
Posting Permissions
Reply With Quote