Quote Originally Posted by Bentfork View Post
I know what you mean. The cable on my X-1 gets underneath the foot on the upper most part of the shaft below the armrest. When I set the Explorer down I have to pull it out from under it. But the DX-1 on my MXT gets caught on my Lesche digger sheath as I swing.

I was just wondering because of the pics if you experienced some interference with the cable flopping around. It probably is far enough away from the loop, but the cable having wire in it made me wonder...

G.
I haven't experienced any problems actually. When I hold the cable as illustrated above, it remains firmly still - no flopping at all. One of the reasons for my holding it that way is that I didn't want the loose cable to perhaps interfere with the coil's operation. I'm not sure if it does, but I didn't want to take any chances.