dont know what it is but its kinda neat. its gold clad or was at one time it was 6 inches deep. and showed as a ring on the display.
dont know what it is but its kinda neat. its gold clad or was at one time it was 6 inches deep. and showed as a ring on the display.
hey emmarold1998
can you post a good clear closeup picture of the back , do you see any hallmarks or maker's marks on it anywhere ??
"Honesty is an expensive gift ,
so don't expect it from cheap people"
XP Deus II , DFX ,TDI sl -
Click here to view my finds album
not any hallmarks that i could find the back is pretty deteriorated i will try to post up a pic of it later tho
here you go hope these are better
well those pics are clear as mud dont understand why they are crystal clear on the camera let me try again
its a bit hard to make out emmarold1998
"Honesty is an expensive gift ,
so don't expect it from cheap people"
XP Deus II , DFX ,TDI sl -
Click here to view my finds album
I believe it may have been a ring. I make jewelry and the tearout in the back looks a lot like some of the broken rings i have repaired. Some makers use a very thin plade on the back and the roumnd part of the ring is soldered to the backplate. Due to the thinness of the plate and the small solder spot, many times the top would tear off when caught on things.
E-Trac & MXT
Posting Permissions
Reply With Quote