Hi and welcome to the forum!
Hi and welcome to the forum!
Minelab E-Trac/Sun Ray X-1 -- Minelab Sovereign GT/Sun Ray S-1 -- White's v3i/Sun Ray DX-1
Fisher CZ3D -- Tesoro Tiger Shark -- Garrett ACE 250
Hey capt, and welcome to the forum I been reading a lot on the teknetics and fixing to make the plung myself.
Ricky
Welcome aboard. Lots of great information here.
Hello from the California Desert 8)
howdy yourself // glad to have you here on the best md forum on the net ....
im an american proud and free, a son of the south dont tread on me
Welcome aboard Capt.!!
V3i DFX 10 DD 6x10 DD 4x6 DD DX-1
Welcome to the mottly crew...
The Gamma 6000 is a up dated version of the Bountyhunter Platinum. It offers a manual ground balance feature(which is incredibly simple to use) that the Platinum does not. The response to signals has been tweaked to be similar to the Omega 8000. It has an incredibly quick recovery time and target separation is off the chart in trashy areas. I recommend to anyone considering purchasing a Teknetics product to get the 5 inch DD coil as well if you are going to be hunting in parks and tot lots or school grounds. The small coil will go deeper than you would expect and is like a razorblade in the ground, letting you slice through the trash like a precision instrument. (that last line is pretty good huh?) I have dug 2 wheat pennies at 7 to 7 and 1/2 inches with this coil, measured with my digger. Both of these targets gave a high tone with a solid VID number. I truly believe it will go a bit deeper over the right target, but that is my opinion.. While the Omega offers a couple more bells and whistles, the Gamma seems to run a little hotter according to an individual (on another site) who has both. He and his wife check targets behind each other and the Gamma, according to him, would go a little deeper than his Omega with a more stable VID. (His detectors in his soil, but noteworthy non the less.) I know of one other gentleman who also has both detectors and can't decide which one he likes best from day to day. Mine air tested (with the stock coil) Between 7 to 12 inches...the lower number giving a repeatable VID# and the higher number giving an appropriate identifying tone. Similar results with the 11 DD coil. I am quite happy with mine. I have to get up and go to work. We just stopped in Memphis for fuel and supplies and I gotta be on watch in 15 minutes. Hope this helps.
capt.
Lineboat captain by trade, metal detectorist by choice. USANG vet. 1986-94. May God bless our men and women in uniform.
Almost forgot, thanks for the great welcome guys and gals. It is most appreciated.
Lineboat captain by trade, metal detectorist by choice. USANG vet. 1986-94. May God bless our men and women in uniform.
Welcome to the forum from snowy Colorado,Capt. I recently purchased a 6000 for the wife as the Whites MXT was a bit heavy for her to swing for a long time and you are right. The thing looks like a toy at first but is a great little detector for the price. Be sure to post your finds. It helps to see finds when it is freezing outside.
E-trac, Teknetics T2 SE, MXT, 6T.
"TODAY's THE DAY" Mel Fisher
And a howdy right back at cha, welcome aboard thumbsup01
hi and welcome.
If it wasn't for flashbacks, i would have no memory at all
Welcome from frozen over and disappointed football wise Chicago!
Welcome to the forum Capt!
Having fun is what it is all about!