Search results

Here is a post from Bryce-IL (a very experienced and respected Explorer SE user). It is a great read. I tried to copy its format for the most part. Start Quote - [size=1:crazy:t]Explorer VS ctx3030 side by side comparison: My personal opinions, thoughts and results. Howdy fellers'. The...

For any of you guys who want to see how the CTX screen looks, targets sound, etc. Enjoy - Albert Here is a 9 deep zinc coin, compared in 50 CO and Combine: Minelab CTX 3030 - 9 Deep Coin - 50 CO & Combine Here is an 8 Coin in the side of the hole on angle: Minelab CTX 3030 - 8 Deep Coin -...

Here is the test that Kyle requested (on another forum) in reference to a Norfolk Wolf video. It was actually pretty fun to do. I have to say I learned a lot and have a lot more questions. After the CTX performed well with the targets 6 - 10 apart (not all on video) I basically spent the test...

(I posted this on the boards with testers for the CTX - Hoping for a Minelab solution) This is regarding Gray Ghost, Sun Ray, Chef Phones, etc. not shutting off the detectors speaker when connected to the headphone module. This is not about the WM10, just those of us with the starter pack...

Guys, I have to say, by far, this is the best (and cheapest) loop I have come across for coins. It has a bright light (if need be) and really helps to make out the details on the coil. It has 45X magnification - I imagine the stronger ones won't work very well so don't go above 45X. You can...

http://www.minelabowners.com/forum/attachments/f84/569d1335924546-new-minelab-mayfirst.jpg And they have a countdown on their homepage. Hmmmmmmm.....

I got some great footage of some coins in iron and here is one of them. Less than 3 minutes long. Here I dug a smaller coin in fairly heavy iron at 8. You can really see the Fe numbers CONSISTENTLY stay down, at least from one angle. Don't pass up those Fe numbers in the 20's - investigate...

This intro to the E-Tracs 2D screen is more for those unfamiliar with it’s operation but also might be of interest for those of us who use it on a regular basis. My ground is iron mineralized, so a lot of what I am writing here might be more important to those not in sweet ground. I should say...

(Deeper in my soil and measured with a tape measure!) Each Video is only 3 minutes and edited. Settings given as well as Coins VDI readings out of ground. Longer swings are kind of hard as the ground is a bit trashy in places, but I did it where possible. I hope to improve on these videos so...

I found this small target at around 9“ in TTF. I almost walked past it as it was just a very slight “blip” in between the iron sounds. I was running in manual 30 and then checked the signal in auto +3, which was running at 29 (When it’s that high I usually just go to manual 30 if conditions...

Hey guys, It was warmer today so I went out looking for deeper coins. I only could find 2 in 6 hours! But, I did get one of them on video. I Played with the following settings: Ground Neutral vs. Difficult Audio response Normal vs. Long Fast On vs. Fast off Deep on vs. Deep off Would love...

Markg over on another forum posted this: Etrac sounds Now, not everyone has experienced this on targets at the end of the detection depth spectrum. I have seen this thunk on some deeper targets (8) and gotten a little bit of it on video. But I got a good signal after the E-Trac locked on...

Hey Guys, The ground will probably be frozen here shortly so I thought to put up a couple of videos which are more on the educational side. I thought had noticed this E-Trac locking on to targets and got it on video. This is where you get a so so signal and then it appears to get better. I...

Hey guys, I thought it would be interesting to get your comments on this target. It was around 9 or so deep and zinc. It's in bad shape, nothing special but I got a lot of swings in over the target so we could investigate the sounds and screen and also changed fast on to fast off for a...

This big dog scared the C R A P out of me. Imagine digging a hole and not hearing a thing and then turning to your left and seeing a dog 6 from your face that is taller than you when you are up on your knees! Well, I was only shocked as I'm not afraid of dogs. Man it was a great experience (in...

What an incredible day. I found 2 silver rings, one at 7“, and 14 coins. Around half of them were 7” – 8” deep. Before today the deepest coin I had ever found was around 7” or 8” and that was 1! The amazing thing was that all of the deep coins but one, were smaller sized and NOT silver. I can...

Here you go. This is the Magic Arm I bought on Ebay. They have different clamps so make sure you get the nicer and more adjustable one. There is ZERO arm interference (pic one) next to the arm as you can see there is plenty of space and the mount is off to the left slightly. I checked and it's...

I thought to post things here first, then the other forum ;-) What can I say, wow, what a fun day - 5.5 hours. In two days with the E-Trac I have found my deepest finds, by far. I had like 4 targets at 7 today. My deepest target was a locket like thing at 9 or so. Had my best day for coins...

I posted this on another forum but here it goes again... I got out for a quick hunt today with my E-Trac. I felt pretty comfortable with the sounds and controls from the get go. Bill was right, the sounds came quick. I just used the stock coin program after running some coins on it at home the...

Ok, it's a month old but the price was too good and it has the full warranty (card wasn't turned in yet - Is that true?). In Germany they cost €1550 Euro and I found a 1 month old unit for €1000 Euro in England from a dealer. :omg: It was on Ebay in England for 4 days, guess things cost less in...