are indians to deep to be found with the normal etrac coil

[freemindstuck]

I'd rather have a pet mole that I can train to just go get the coins for me.

 

[ssserena]

:frozen: go away so I can get my Indians!

 

[CTDirtFisher]

I found 136 Indian Heads in 2012 here in Illinois with my stock E-Trac coil. I'd say that 90% of them were 5 to 7 deep. I just dig every signal that has a conductive number of 30 or higher and is at least 3 deep. I've had Indian Heads ring up as low as 12-30 and as high as 12-41.

There are still a LOT of Indian Heads out there to be found, and the stock coil on the E-trac will definitely find them. thumbsup01

Tony is spot on... I've dug 100+ Indians with my E-Trac as well... Ferrous will normall be a little lower (down to 8) and if all is perfect conductive will ring in @ 35... but often can look like a pull tab... often they are not solid signals... and sometimes they look like a wheat / copper penny...

Paul

 

[ssserena]

ive never had a penny ring up in a low tone are you sure your talking about a etrac!35 :barf:

 

[Tony Two-Cent]

Paul was talking about the FERROUS number (the first number) coming in at 8. For example 08-35 on the E-Trac could be an Indian Head.

 

[SovereignGT]

Found 3 IH's today with my Etrac and small SEF 6x8 coil (1899 & two 1903's) So I think the stock PRO coil is quite capable.

 

[ssserena]

pokie sayed the last number is the most important number!