aloldstuff
Moderator
I am now going into my second year with the same pair of leather gloves.
gloves?
- Thread starter randy
- Start date
TC-NM
New member
randy link=topic=7574.msg87182#msg87182 date=1319730502 said:
Hello Randy,
I prefer gloves that have some tackyness at each finger tip so gripping the detector handle, digging tool/trowel and other tools won't slip. I found these at Harbor Freight. There named 'western safety' and there about under 6 bucks. There made of nylon and faux leather so you can throw them in the washing machine if really dirty. My friend gave me a pair of G-Tech gloves a couple of years ago and I really like the feel and the tackyness at each finger tips, they run about 4 bucks.
Good Luck in your decision,
TC-NM
Attachments
del
Administrator
RobW link=topic=7574.msg132501#msg132501 date=1358957870 said:
oh Rob , Rob , Rob \:hammer: , you'll quickley change your stance after that first time you slice your finger open on a piece of glass or sharp piece of metal while your scooping out the dirt from a hole.
i have a bet that Al isnt big on kissing boo-boos either lol lol
I use heavy leather work gloves that my company gets for doing septic work. I find I lose a little dexterity but am fully protected when something tries to poke me in the hole. The gloves also come in very handy for bottle diggin' as they are so thick there is no risk of cuts when handling glass shards... They also work super well for heavy yard work...
Tony Two-Cent
Administrator
del link=topic=7574.msg132513#msg132513 date=1358974436 said:
When I first got my E-Trac in the spring of 2011 I was hunting in a park and a little girl about 9 or 10 years old was watching me. She was very polite and well-mannered. I was recovering a target and reached down into the hole to scoop the dirt out. I cut my finger BAD on a piece of broken glass. The blood was pouring out. I thought the little girl was going to pass out. (And I didn't feel so hot either, LOL!)
From that day on I have never hunted without gloves. Lesson learned.
Last edited:
del link=topic=7574.msg132513#msg132513 date=1358974436 said:
AAAAHHH...Dan...be a man...some cuts and scraps, a little blood...just make sure you have your tetnise shot up to date....
as I said just use your lesche or small shovel when needing to be careful in the hole...
But that just goes to show...you do care.... :grouphug:
aloldstuff
Moderator
Tony Two-Cent link=topic=7574.msg132527#msg132527 date=1358996275 said:
It only took digging into red ants twice to convince me that gloves are needed. Won
t go detecting without them now.
happycamper08
New member
I like the mechanics gloves all the others I have tried take away to much feeling or dexterity.
KSHOLLYWOOD
New member
Buy cheap you get cheap. I paid $20 for a pair at the hardware store and the have lasted 2 years.
Scratch
New member
I used to detect without gloves but the hook end of a coiled spring taught me a lesson. True, the mechanic's gloves wear out pretty quick, but while they last they have pretty good 'feel' and fit.
I used heavy leather gloves for underwater recovery. The last thing you want to leave behind you in Gulf waters is blood.
I used heavy leather gloves for underwater recovery. The last thing you want to leave behind you in Gulf waters is blood.
Digger_O'Dell
New member
I use a knit coated cut level 3 safety glove. Being knit, it breathes well to keep cool in summer, yet adds warmth when it's cool. With the cut and abrasion resistance I have no signs of wear other when I lost some of the coating so far which was no big deal to me. I have dug many holes and suspect they will last many years. They have saved my hands countless times from broken glass, razor sharp shredded cans, etc. Price was only about $10. There are better ones out there too, depending on cut level, puncture resistance, and abrasion resistance. Just depends on what you want to spend. Seen extreme condition level 5 gloves go for over $200 a pair.