mxt settings

[BOWSER]

after trying several settings on the mxt ,i find that i like the setting 3 on disc and 7 on gain for most situations in the ground here in ma. I am not sure i really need to get into the plus situations unless i'm in a relatively trash free areas.am i wrong in thinkin this way. :dontknow:

 

[Toadman]

I run 2 and 10.. this is how i run it 99 % of the time..I go hotter when there a very few targets .. Those settings you mention may work in tot-lots though..

 

[Dirt Fisher]

i run 2 and a +1. That seems to do the trick for me. eace:

 

[v3ikid]

I run 2 and +3. Yeah it's a little noisy but it allows the 5.3 to get pretty deep for it's size.

 

[fastfwd]

I run 2 and 10.. this is how i run it 99 % of the time..I go hotter when there a very few targets .. Those settings you mention may work in tot-lots though..

same here 2 and 10 unless im getting interference from power lines or something then i drop down to 2 and 8

 

[Vito]

Gain on preset and disc on 3 here. If there is a iffy target the gain is turned all the way up to get a better target ID. Threshold is where i can barely listen to the hum (some time a little less, depends on how my tinnitus stresses me). And I always search in two-tone ID mode (relic and trigger in center position). This way I won't miss targets on the disc's edge (gold/jewelry).

Vito

Happy Hunting