Testing my AT Pro--1st & 2nd test
- Thread starter Dimeman
- Start date
pulltabsteve
New member
Re: Will be testing my AT Pro
Im glad you'll be doing the test. I trust your input Robbie! The AT pro just may be my next machine thumbsup01
Im glad you'll be doing the test. I trust your input Robbie! The AT pro just may be my next machine thumbsup01
Re: Will be testing my AT Pro
1st test of the AT Pro
Garrett AT Pro Coin VDI numbers
Tested each coin with at least 6 passes under the coil in STD Zero mode.
Coin tested number reading
Ike $1------------------------97-99
New small dollar----------- 87
silver half dollar-------------93
clad half dollar--------------92
quarter-----------------------88-90
dime---------------------------83
copper Lincoln 1 cent-------80
Indian Head 1 cent---------76
Zinc Lincoln------------------75
5 cents----------------------52-53
War nickel------------------52-53
This was an air test to get a baseline of the VDI for different coins. Coins in the ground could have a slightly higher or lower number due to different soil conditions.
1st test of the AT Pro
Garrett AT Pro Coin VDI numbers
Tested each coin with at least 6 passes under the coil in STD Zero mode.
Coin tested number reading
Ike $1------------------------97-99
New small dollar----------- 87
silver half dollar-------------93
clad half dollar--------------92
quarter-----------------------88-90
dime---------------------------83
copper Lincoln 1 cent-------80
Indian Head 1 cent---------76
Zinc Lincoln------------------75
5 cents----------------------52-53
War nickel------------------52-53
This was an air test to get a baseline of the VDI for different coins. Coins in the ground could have a slightly higher or lower number due to different soil conditions.
Re: Testing my AT Pro--1st test
Ain't THAT the truth...... 8/
Gonna have to bring a cheat sheet like I did when I 1st got my Whites M6. lol
Ain't THAT the truth...... 8/
Gonna have to bring a cheat sheet like I did when I 1st got my Whites M6. lol
M-Taliesin
New member
Re: Testing my AT Pro--1st test
Howdy Robbie!
You surely got your hands on an awesome machine. From what I saw at Garrett's factory, that unit should perform as well, if not better than, an MXT. It also runs on 15khz frequency. But it has one critical advantage the MXT lacks: It can be submerged up to 10 feet of water. That opens up a whole bunch of beach hunting that the MXT can never match.
I'll be looking forward to your impressions as you work with that machine.
Don't forget to test out that pro mode too. I believe it will prove to be an outstanding machine for hunting in any terrain, any environment, and any situation.
I hope to get one myself in the next couple of months.
Blessings,
M-Taliesin
Howdy Robbie!
You surely got your hands on an awesome machine. From what I saw at Garrett's factory, that unit should perform as well, if not better than, an MXT. It also runs on 15khz frequency. But it has one critical advantage the MXT lacks: It can be submerged up to 10 feet of water. That opens up a whole bunch of beach hunting that the MXT can never match.
I'll be looking forward to your impressions as you work with that machine.
Don't forget to test out that pro mode too. I believe it will prove to be an outstanding machine for hunting in any terrain, any environment, and any situation.
I hope to get one myself in the next couple of months.
Blessings,
M-Taliesin
Here is my 2nd test of the AT Pro.
Garrett AT Pro VDI number test -- Misc items
Detector set in STD and Zero mode.
This is a baseline test to see the numeric scale on items normally found while coin and jewelry detecting.
Each item was passed under the coil at least 6 times to get repeatable number signal.
NOTE--Items in the ground may read lower or higher numbers due to different soil conditions, and the way the item may be situated in the ground.
ITEM VDI NUMBER
Sm. 10K gold ring------------42-43
Lg. junk earing-------------------47
Sm. religious charm----------52-53
Sq. end pull tab----------------53-55
Sm. silver earing----------------63
Sm. charm------------------------66
Med. charm-----------------------70
Med. plated ring-----------------76
Chuck-E-Cheese token-------78
Lg. plated ring-------------------80
Sm. silver charm----------------82
Sm. silver ring--------------------84
Med. silver ring-------------------89
Aluminum token------------------92
Lg. silver ring----------------------92-92
14K gold chain 21 inch---------48-50
Having used Whites detectors for 20 years it will be a learning experiance for the VDI numbers and the way the Garrett tones are. I had a Garrett many, many years ago, and the single tone bell tone, was not to my liking.
The AT Pro has 3 tones and only the high tone is the Bell tone sound. Much better !!!!!!! :yes:
Garrett AT Pro VDI number test -- Misc items
Detector set in STD and Zero mode.
This is a baseline test to see the numeric scale on items normally found while coin and jewelry detecting.
Each item was passed under the coil at least 6 times to get repeatable number signal.
NOTE--Items in the ground may read lower or higher numbers due to different soil conditions, and the way the item may be situated in the ground.
ITEM VDI NUMBER
Sm. 10K gold ring------------42-43
Lg. junk earing-------------------47
Sm. religious charm----------52-53
Sq. end pull tab----------------53-55
Sm. silver earing----------------63
Sm. charm------------------------66
Med. charm-----------------------70
Med. plated ring-----------------76
Chuck-E-Cheese token-------78
Lg. plated ring-------------------80
Sm. silver charm----------------82
Sm. silver ring--------------------84
Med. silver ring-------------------89
Aluminum token------------------92
Lg. silver ring----------------------92-92
14K gold chain 21 inch---------48-50
Having used Whites detectors for 20 years it will be a learning experiance for the VDI numbers and the way the Garrett tones are. I had a Garrett many, many years ago, and the single tone bell tone, was not to my liking.
The AT Pro has 3 tones and only the high tone is the Bell tone sound. Much better !!!!!!! :yes:
Attachments
I haven't even started to use the different things to adjust on the AT Pro, like the iron reject, and the different aspects of the Pro Mode.
I'm in beginner mode on it, because it is different than all the Whites I have used in the last 20 years, and am trying to learn the basics 1st, then move on to the other options on the detector.
I'm in beginner mode on it, because it is different than all the Whites I have used in the last 20 years, and am trying to learn the basics 1st, then move on to the other options on the detector.
BOWSER
New member
glad to hear about your finds are these finds in areas you have hunte before or are they new hunting areas, also what are the depths involved here ,i would imagine they are about the same.If you decide you like one brand over the other will you mail me the brand detectors you don't want anymore.Your friend jim, I will pm my address
The areas I have searched before. The 2nd outing all but 2 coins were dug at over 6 inches deep, in a small area where I tried the M6 and 6X10 coil.
OK Jim-----I'll only charge you postage.
.........but I tell you, my postage is really expensive.......... 
wingmaster
New member
What coil did you have on the AT pro on this hunt?The areas I have searched before. The 2nd outing all but 2 coins were dug at over 6 inches deep, in a small area where I tried the M6 and 6X10 coil.
OK Jim-----I'll only charge you postage.
I only have the stock , 8 1/2 X 11 DD coil.